- بيت
- /
- حقن البلاستيك
- /
- تصنيع قوالب الحقن
حقن البلاستيك
تصنيع قوالب الحقن
From your 3D file to a production-ready steel mold, built in our own Dongguan tool shop. DFM review, mold design, precision machining, polishing and mold trial — one team, one quotation, one accountable partner.
Since 2005 top-10 mold maker
0.005 mm CNC accuracy
3–6 wks to T1 samples
Mold Types
The right mold for your volume and part.
Cavity count, runner system and steel are chosen from your annual quantity, part geometry and surface requirement — and explained in the DFM report before you approve the design.
01
Hot Runner Molds
Heated manifold keeps the plastic molten to the gate — no runner waste, faster cycles and consistent filling on multi-cavity tools. Best for high volumes and expensive resins.
Best for
100k+ parts / year · PC, PA, POM · tight cosmetics
02
Cold Runner Molds
Simpler, lower-cost tooling with a solid runner that is trimmed after molding. Runners can be re-pelletized, which keeps material loss low on commodity resins.
Best for
Lower volumes · ABS, PP, PE · budget tooling
03
Multi-Cavity & Family Molds
16, 32, 48 or more parts per cycle, or left- and right-hand versions in one tool. Output rises sharply and cost per part drops with every cavity.
Best for
Small parts at scale · matched sets · caps, gears, clips
04
Special Function Molds
Unscrewing molds for threaded parts, sliders and lifters for undercuts, gas-assist for thick sections, and insert / two-shot tooling built to the same standard.
Best for
Threads · undercuts · 2K parts · inserts
Our Tool Shop
Built here, not outsourced.
Every mold is designed, machined, polished and trialled inside our own facility by a team of over 65 staff, fluent in technical English.
Equipment
Spec
What it does for your mold
High-speed CNC (FANUC, Japan)
24,000 rpm
Fine cavity detail and mirror-ready surfaces on hardened steel
Large-stroke CNC × 2
Large molds
Mold bases and big cavities for 800–2,000 T presses
EDM & wire cut
±0.005 mm
Sharp corners, deep ribs and precision inserts
Automatic CMM
Full report
Every cavity and T1 sample dimension measured before approval
Polishing & texturing
SPI A-1 – D-3
Mirror polish for clear parts, VDI / MT textures for cosmetics
Mold trial presses
60 – 2,000 T
T1 samples run in-house on the same press class as production
High-speed CNC (FANUC, Japan)
Every mold is designed, machined, polished and trialled inside our own facility by a team of over 65 staff, fluent in technical English.
P20 / 718
Pre-hardened, 300k–500k shots
S136 / 2316
Stainless, clear & medical parts
H13 / SKD61
Hardened, 1M+ shots, abrasive resins
Aluminum 7075
Prototype & low-volume tools
NAK80
High polish, cosmetic parts
65+ Toolmakers & engineers, 25 T Max mold weight, 1M+ Shots on hardened tools, 100% CMM-measured before shipping
01CNC machining centers
02EDM for ribs and sharp corners
03Wire cut for precision inserts
04Hot runner test before trial
Inside the Shop
Molds we have built recently.
A sample across industries — household appliances, electronics, automotive interior, medical and packaging. Ask us for references in your field.