Where and how to find A FFP2 face mask manufacturer in China?

Currently, You can find an FFP2 face mask manufacturer in China from Dongguan Olayer Technology Co. Ltd. Factory wholesale price, we are able to manufacture several of our Face Masks for varied reasons with reference to the Coronavirus emergency. we have a tendency to do have stock of a restricted vary of protective face masks and presently suggest our FFP2 mask China Respirators because the go-to Face Mask providing the best level of protection, besides that it helps you to stay you cool throughout long periods of use.

Although the products are currently present especially within the reach of many people, they have proven themselves in the private and professional sectors for many years. This applies, among other things, to FFP2 models. An advantage regarding viral diseases is that they, on the one hand, protect their wearer from infection.

FFP2 face mask provides protection for the person who wears it and the people around it at the same time because it does not contain the valve. The World Health Organization confirmed that healthy people should not wear medical masks of all kinds, noting that it is intended only for health care providers or those infected with the virus only.

Below is one of the FFP2 face mask models from our China FFP2 mask manufacturer today, more models will be following. such as N95, FFP1, FFP3, etc


With an assortment of work forms or even day by day life, unsafe particles are available in the room or in the encompassing zone. Contingent upon the adaptation, this can be risky in various ways. Fine residue, cancer-causing particles, or radioactive materials are only a couple of models with regards to the significance of securing the respiratory framework going. On account of the changeless introduction, the respiratory framework influences people and creatures with the referenced particles.

There are perspectives to consider, even in brief timeframes. Since particularly with bacterial and viral microorganisms much of the time there is a danger of contamination.

The face mask in closed public places has become mandatory for fear of the return of the spread of the Coronavirus, as most European countries have imposed it already in public and closed places, or even in the streets as Spain chose. However, northern European countries still believe that they do not have sufficient evidence to confirm the effectiveness of the muzzle in protecting against the virus.

FFP2 face mask

FFP2 face mask

To avoid the second wave of new Coronavirus outbreaks, most countries imposed a muzzle in all enclosed public places such as shops, banks, open markets, malls, public administrations, museums, cinemas, restaurants, hotels, places of worship, and airports.

What is an FFP protective Face mask?

The FFP face mask also called a respiratory protective mask or simply a respirator, it is a type of European Union protective face mask that provides protection against suspended particles such as dust particles and various viruses in the air. The EN 149 standard specifies three classes of these masks depending on their filtering efficiency: FFP1, FFP2, and FFP3. The mask is an example of a mechanical filter respirator mask.

The mask covers half of the face, which means protecting it chin, nose, and mouth. The mask must meet specific criteria and pass the effectiveness tests. Effectiveness evaluation is based on the filter rate (filter penetration, also referred to as efficiency), as well as the degree of leakage around the edges. The mask should be properly adjusted to fit the face.

Unlike an oral surgical mask, this type of mask protects its wearers from inhaling infectious agents or pollutants in the form of aerosols, droplets, or small solid particles.

What is FFP1, FFP2, FFP3 protective face mask?

Performance requirements for three classes of particle filter half-face masks: FFP1, FFP2, and FFP3. FFP2 face mask manufacturer or FFP33 for protection provided by lower-number category masks.

  1. FFP1 Protective Face Mask

It has the lowest filterability among the three masks.

  • Aerosol filtration rate: 80% at a minimum.
  • Internal dropout rate: 22% at maximum.
  • Mainly used as a dust mask for handicrafts. Dust may cause lung disease, asbestos, and iron enchantment, especially dust from coal, silica, iron ore, zinc, aluminum, cement, and asthma.
  1. FFP2 dust protective face Mask

  • Aerosol nomination rate: 94% at a minimum.
  • Internal dropout rate: 8% at maximum.
  • This FFP2 dust face mask provides protection in various fields such as the glass industry, foundries, construction, pharmaceutical industry, and agriculture, and it is effective against chemical powders. This mask can also protect against influenza viruses such as bird flu or the severe acute respiratory syndrome associated with coronavirus, and bacteria that cause both pneumonic plague and tuberculosis, ffp2 face mask is similar to the mask of N95.
  1. FFP3 Face Mask respirator

  • Aerosol filtering rate: 99% at a minimum.
  • Internal dropout rate: 2% at maximum.
  • The FFP3 face mask is the most filtered among the FFP masks, and it protects against ultra-fine particles such as asbestos and porcelain, but it does not provide any protection from gases, especially nitrogen oxide.

What’s the difference between ffp1 ffp2 and ffp3 face masks?

The progressive count (FFP1, FPP2, FFP3) indicates the progressive air filtration capacity of the different types of devices. FFP1 masks have a limited filtering capacity, as they block only the larger particles in the breathed air and are not the most suitable for protecting the wearer from harmful microparticles such as those containing the virus.

FFP2 and FPP3 face masks, on the other hand, have a filtration capacity of tiny particles (including those containing the virus) of 92% for FPP2 and 98% for FFP3. The most effective masks for the protection of oneself and others are the FFP2 masks and the FFP3 masks without the valve, insofar as they guarantee maximum protection both for the wearer and for those around him. The valves, in effect, expel the exhaled air from the wearer, but without filtering it. Their use is therefore not recommended, especially if the wearer is showing symptoms or if he thinks he may be infected.

One of the characteristics of FFP3 masks is, given the high level of filtration and the layering of the materials used to make them, that they can be uncomfortable to breathe for prolonged periods. These masks also have a limited cycle of use. They are made to provide protection for approximately 6 hours, after which filter efficiency is no longer guaranteed, so masks should be discarded.