Mold manufacturing guideline for the clamping plate

By |2019-08-19T15:54:06+08:00August 20th, 2019|Categories: clamping plate, molds|Tags: |Comments Off on Mold manufacturing guideline for the clamping plate

When we manufacture the cavity side of the clamping plate, there are some dimensions that we need to control with some tolerances so that our standard mold components and other parts can fit well in the clamping plate.

For the locating pinholes, the tolerance should be H7 (0/+0.015mm)

The hole diameter for the locating ring, the tolerance should be ±0.02mm

The hole diameter for the Hot runner manifold support insert, the tolerance should be ±0.05mm

The height dimension for the air venting groove on the Hot runner manifold support insert, the tolerance should be ±0.01mm

The slot for the locating pin to the sprue bushing, the tolerance should be 0/+0.10mm

The location of the hole for the locating pin is important, […]