The guide bushing, a kind of plastic injection mold component, is used in combination with the guide post. They together play an important role of guiding and have very tiny gap, which is less than 0.05mm, between each other. Our guide sleeve is generally used for guaranteeing the accurate movement in plastic molds and some machinery.
|Place of Origin||Guangdong, China (Mainland)|
|Shaping Mode||Plastic Injection Mould|
|Material||SUJ2 / 20cr etc|
|Hardness||58HRC-62HRC or depending on materials to be processed|
|Standard||HASCO, DIN, AISI, JIS, etc|
|Delivery time||Normally 5-7 working days|
|Shipping mode||by air (TNT, DHL, UPS, FEDEX )or by sea|
|QC||1) Technicians do self-check in the production
2) Engineers do spot check in the production
3) QC personnel do inspection after the mass production finished
4) International salesmen with technical know-how do spot check before shipping
|Packing||Plastic bag for inner packing and carton box for outer packing. We can also pack guide bushings according to your special requirements.|
|Main Markets||North America, South America, Eastern Europe , West Europe , North Europe, South Europe, South Asia|
|Procedure of order||Please firstly send us your drawing or sample;
We will carry through project assessment;
We will provide you with a design if necessary;
If you are satisfied with our design, we will make the corresponding sample and send it to you;
If you are content with the sample, please place an order and pay 30% deposit of the total amount in advance;
We will then start the formal mass production of guide bushing;
We will deliver the finished products to Yiantian, Shenzhen
You can pay the balance after seeing the B/L Copy;
The above is the whole procedure order.
If you aer looking for any plastic injection mold guide pin and guide bushing for your market, contact us, we will make this for you.