PMMA injection molding, acrylic injection molding, or polymethyl methacrylate molding is a process where organic glass or acrylic is injected into an injection mold cavity to mold a particular product upon cooling and hardening. The PMMA injection molding parts are normally used to make some transient components or parts, such as car windows, LED lenses, display boxes, and LED screens for some electric appliances. Acrylic is preferred to glass because it has better abrasion resistance. Injection molding PMMA has excellent light transmission properties compared to all the other plastic materials in the world today, making it an ideal material for applications where clarity is essential. Additionally, there are lots of thin-walled, clear plastic parts that select PMMA as the molding material.

PMMA Injection Molding Technology

PMMA is the highest transperant plastic materils but PMMA is easy to break comparing to PC or ABS, so PMMA’s modification appears one after another such as copolymerization between methyl methacrylate and styrene and butadiene, a blend of PMMA and PC, etc. 372 PMMA is the copolymer of methyl methacrylate and styrene. If you add a small amount of nitrile rubber (about 50%) in the 372 PMMA, it will become 373 PMMA.

The fluidity of PMMA is poorer than that of PS, ABS and its melt viscosity is rather sensitive to the change of temperature. In molding, it changes the melt viscosity mainly from the injection temperature. PMMA is an amorphous polymer, the melt temperature is above 160 Celsius degree and the decomposition temperature can reach 270 Celsius degree.

1. Processing of plastic
   PMMA has a certain degree of water absorption of 0.3-0.4%. The injection molding moisture must be less than 0.1%. Typically, it is 0.04%. The presence of moisture causes bubbles, gas lines, and low transparency. So it should be dried. Dying temperature is 80–90 degrees Celsius, and drying time is 3 hours or more. In some cases, the utilization of recycled materials can reach 100%. The actual quantity depends on the requirements for quality. Usually, it can reach 30%. You should make sure there is no pollution of recycled materials, or it will influence the transparency and nature of the finished products.
2. Selection of an injection molding machine
   The PMMA material doesn’t have special requirements for the injection molding machine. Due to the great melt viscosity, it requires the grooves to be deeper and the nozzle hole to have a larger diameter. If you need products with higher strength requirements, you should use a larger aspect ratio of the screw to implement low-temperature plastics. In addition, PMMA must use a drying hopper to store material.
3. Design of mold and gate
   Mold temperature can be 60–80 °C. The diameter of the sprue should match the internal taper. The optimum angle is 5 to 7. If the wall thickness of injecting molding products is 4 mm or more, the angle should be 7, the diameter of the mainstream channel should be 8 to 10 mm, and the overall length of the gate should not exceed 50 mm.
   For products with a wall thickness less than 4 mm, the diameter of the flow channel should be 6–8 mm. If the wall thickness is more than 4 mm, the diameter of the flow channel should be 8–12 mm. The depth of the fan-shaped and tab-shaped gates should be 0.7 to 0.9 t (t is the wall thickness of the product), and the diameter of the pin gate should be 0.8 to 2 mm. Products with lower viscosity should choose the smaller size. The common venting hole’s depth is 0.05 to 0.07 mm, its width is 6 mm, the stripping slope is 30′-1, and the and the cavity portions are between 35′-1 and 30.

4. Melt temperature
   You can use the air injection method to measure temperatures ranging from 210 to 270 degrees Celsius, which depends on the information provided by the supplier.
5. Injection temperature
   You can use rapid injection to avoid generating a high degree of internal stress. It’s suitable to use multi-level injection, such as slow, fast, slow, etc. When injecting the thick parts, you should use a slow speed.
6. Dwell time
   If the temperature is 260 degrees Celsius, the dwell time is within 10 minutes. If the temperature is 270 degrees Celsius, the dwell time is within 8 minutes.

1. Eyeglass lenses: PMMA is one of the best materials for eyeglasses due to its excellent optical properties. It has the highest transparency of all other plastic materials, making it the best choice for eyewear.
2. Plexiglass windows: PMMA, also known as plexiglass or acrylic glass, is a popular alternative to traditional glass windows due to its high impact resistance and optical clarity. It is commonly used in buildings, aquariums, and even airplane windows.
3. Mobile phone casings: PMMA is used in the manufacturing of mobile phone casings due to its high impact resistance, scratch resistance, and optical clarity. It is also lightweight and can be easily molded into various shapes and sizes.
4. Computer and electronics casings: Similar to mobile phone casings, PMMA is used in the manufacturing of computer and electronics casings due to its durability, impact resistance, and optical clarity. It is also lightweight and can be easily molded into various shapes and sizes.
5. Vehicle windshields: PMMA is commonly used in the manufacturing of vehicle windshields due to its high impact resistance and optical clarity. It is also lighter than glass, which can improve fuel efficiency.
6. LED lens: You see the light on the street and your house; that small lens inside is made of PMMA injection molding parts. This is very popular in the light industry.

Below are a few of the acrylic injection molding parts we made before. If you have any project that needs PMMA molding products, feel free to send us your data, and we will offer you the best quality with our expert experience in PMMA molding service.

Research has confirmed that acrylic injection molding materials are more scratch-resistant than other glass products. In this manner, the molding process generates products that can maintain their lustrous appearances for a long without degradation.

Acrylic has a density of 1.185 grams per cubic centimeter. On the other hand, glass has a density of 2.4 grams per cubic centimeter. As a result, PMMA plastic molding produces products that can be used as lightweight alternatives to glass.

Injection molding develops advanced shapes that cannot be generated by other injection molding processes, such as metal injection molding. Furthermore, the PMMA injection molding process can reproduce a significant number of products that are identical in terms of shape, size, and weight.

The PMMA injection molding process is faster than metal injection molding. As a result, more production units can be produced through this process in a given amount of time. Technical analyses have confirmed that PMMA injection molding plants have shorter cycle times, which increase the overall production output of the industry.

Acrylic injection molding produces items that can be mixed with resins to create a wide variety of colored products. In contrast, this feature is not present in other processes, such as metal or glass injection molding.

PMMA material called acrylic, or plexiglass, has a transmittance of up to 92%, which is higher than glass. That means acrylic molding is one of the best options for high-requirement transparent injection molding parts, such as glass, optical glass, lenses, car lights, transparent pipes, etc.

Given the above points, it is essential to understand how PMMA injection molding works, its applications, advantages, and disadvantages. Also, knowledge is vital in helping you appreciate the PMMA injection molding process.

If you want to see more transparent plastic molding parts, please go to our transparent plastic molding page. If you have any project that needs PMMA injection molding or any other custom mold and molding parts, you are welcome to send us an email, and we will offer you the best option.