Submarine gate

Home/Tag: Submarine gate
12 10, 2019

Plastic Injection Molding Gate Types

By |2019-10-09T15:55:14+08:00October 12th, 2019|Categories: Direct sprue gate, Disk gate, Fan gate, Film gate, Pinpoint gate, Side gate, Submarine gate, Tap gate|Tags: , , , , , , , |Comments Off on Plastic Injection Molding Gate Types

There are many types of gates for plastic injection molding parts, such as Direct sprue gate, Side gate, Fan gate, Pinpoint gate, Submarine gate, etc. Every type of gate that has its advantages, today we will explain each type of molding gate when you use your molding parts, according to each gate of advantages and disadvantages you could choose the gate you prefer,

Gate types and descriptions

  1. Direct sprue gate – used in the case of single-cavity or when putting the gate direct to the base of the injection-molded product. Residual strain tends to occur because the injection pressure will directly apply to the molded product, but its mold construction is most simple, this type of […]
31 03, 2019

Injection Mold

By |2020-01-07T22:34:17+08:00March 31st, 2019|Categories: cold runner mold, cold runner molding, hot runner mold, hot runner molding, hot runner moulding, Injection Mold China, injection molding, injection molding process, injection mould, molds, three plate mold, two plate mold|Tags: , , , , , , , , , |0 Comments

In modern industrial production, mold is an important technology used in shaping products (including metal products and nonmetal products) for all of the industries. Meanwhile, it is the ‘magnifying glass of efficiency and profit’ to the raw material and equipment, because the value of the final product made in the mold is often tens of, even hundreds of times as valuable as that of the mold itself.

The mold industry is the basic industry of the national economy, and it is called ‘the mother of industry’. Every aspect of human life such as clothes, food, housing, and transportation is closely connected with the mold industry. Therefore, the level of injection mold technology has been a significant […]